The 12PIN end-of-line male connector is commonly used to connect different types of electronic devices, mainly with its 12-pin design, which can realize highly reliable data transmission and signal transmission. This connector usually uses a 9-pin PROFIBUSDP header or RS485 male connector, which can be terminated with a terminating resistor selected in the termination network, e.g., the CB1241 provides an internal terminating resistor, and does not have a 9-pin female D-type connector to connect the terminating resistor to short TRA and TA, and to short TRB and TB.

The pin functions of 12-PIN wire-terminated male connectors also vary depending on the application scenario and device type. For example, in a USB connector, pin 1 is typically used for power, pin 2 and pin 3 are typically used for data transfer, pin 4 and pin 5 are typically used for ground, pin 6 and pin 7 are typically used for control signals, pin 8 and pin 9 are typically used for high-speed data transfer, pin 10 and pin 11 are typically used for low-speed data transfer, and pin 12 is typically used for backup.

The pin spacing of 12PIN end-of-line male connectors is usually 2.54mm, and there are some special connectors with other pin spacing. The pin spacing of a connector is the distance between two adjacent pins, which determines the size and pluggability of the connector.

The pin material of 12PIN male end-of-line connectors is usually copper or gold-plated copper to improve the electrical conductivity and corrosion resistance of the connector. The connector's pin material also affects the connector's performance and life.

ZYX High Speed 6PIN Female Connecor for Cable-Black

Characteristics And Advantages
1.Meet the stringent reliability requirements of au utomotive elect
2.Fully shielded metal housing with EMl performance;
3.Connectors and harness assemblies,support USB 2.0+LVDS+GVIF three protocols.

1.USB Connection
2.Display Connection
3.Rear Seat Connection
4.Camera Connection
5.Combi Instrument Connection